You have no items in your shopping cart.
Course Details
Topic 1 Working with Sense HAT
- Introduction to Sense HAT
- Displaying Text
- Manipulating Pixels
- Sensing Environment Data
- Detecting Movement with IMU
- Using Joystick
Topic 2 Working with Node-RED
- Introduction to Node-RED
- Creating Basic Flows with Nodes
- Install Dashboard Node
- Sensing and Visualizing Environment Data
- Sensing and Visualizing Movement Data
Topic 3 Sensing Distance
- Sensing Distance using Ultrasonic Sensor
Topic 4: Motion Detector Mini Project
Course Info
Promotion Code
Your will get 10% discount voucher for 2nd course onwards if you write us a Google review.
Minimum Entry Requirement
Knowledge and Skills
- Able to operate using computer functions
- Minimum 3 GCE ‘O’ Levels Passes including English or WPL Level 5 (Average of Reading, Listening, Speaking & Writing Scores)
Attitude
- Positive Learning Attitude
- Enthusiastic Learner
Experience
- Minimum of 1 year of working experience.
Target Age Group: 21-65 years old
Minimum Software/Hardware Requirement
Software:
You can download and install the following software:
Hardware: Windows and Mac Laptops
SSG Training Grant
SSG TG is $15 per pax. Net fee after SSG TG is $309.82. Absentee Payroll is not eligible.
Steps to Apply Skills Future Claim
- The staff will send you an invoice with the fee breakdown.
- Login to the MySkillsFuture portal, select the course you’re enrolling on and enter the course date and schedule.
- Enter the course fee payable by you (including GST) and enter the amount of credit to claim.
- Upload your invoice and click ‘Submit’
Get Additional Course Fee Support Up to $500 under UTAP
The Union Training Assistance Programme (UTAP) is a training benefit provided to NTUC Union Members with an objective of encouraging them to upgrade with skills training. It is provided to minimize the training cost. If you are a NTUC Union Member then you can get 50% funding (capped at $500 per year) under Union Training Assistance Programme (UTAP).
For more information visit NTUC U Portal – Union Training Assistance Program (UTAP)
Steps to Apply UTAP
- Log in to your U Portal account to submit your UTAP application upon completion of the course.
Note
- SSG subsidy is available for Singapore Citizens, Permanent Residents, and Corporates.
- All Singaporeans aged 25 and above can use their SkillsFuture Credit to pay. For more details, visit www.skillsfuture.gov.sg/credit
- An unfunded course fee can be claimed via SkillsFuture Credit or paid in cash.
- UTAP funding for NTUC Union Members is capped at $250 for 39 years and below and at $500 for 40 years and above.
- UTAP support amount will be paid to training provider first and claimed after end of class by learner.
Job Roles
- Electronics hobbyists
- Engineers
- Raspberry Pi hobbyists
Trainers
Man Guo Chang: Man Guo Chang graduated from Nanyang Technological University, School of Electrical and Electronic Engineering, major in Computer Engineering.
He has more than 25 years of working experience in the Semiconductor field, specialized in IC Testing, Inline Electrical Testing, Product & Yield Engineering, Data Analysis, System Engineering, and Software Development. He is also an ACTA certified trainer, currently providing STEM training to adult learners in the area of Computer Vision, Internet of Things, Embedded Electronics, and Python Programming
Richard Wan: Richard Wan is a ACTA certified trainer. Richard Wan has more than 30 years of experience in software development in various computer disciplines, including computer vision, communication and digital publishing.
Technical expertise includes: Windows, Linux developments with C, C++, Delphi (Object Pascal), Visual Studio, OpenCV. Embedded system programming including microcontrollers, Arduino, Pi, BeagleBone etc.
Ken Yuen: Ken Yuen is a ACTA certified trainer. He has more than 10 years of experience working as an instructor, Application Development Engineer, Technical Consultant and Project Manager. He is an MOE-Registered Instructor teaching STEM programs for past 3 years such as Arduino, Micro:bits and robotics to schools and libraries based on the smart nation initiative roadmap.
He completed his Diploma in Electronic Engineering at Singapore Polytechnic and graduated with Bachelor of Electrical and Electronics Engineering from Nanyang Technological University and certified PMP (Project Management Professional).
Customer Reviews (16)
- will recommend Review by Course Participant/Trainee
-
. (Posted on 6/3/2024)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment - will recommend Review by Course Participant/Trainee
-
longer and more content with hardware1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment
Integrated with robotics (Posted on 2/4/2022) - will recommend Review by Course Participant/Trainee
-
Trainee knowledgeable and willing to share solutions. Thanks. (Posted on 3/3/2020)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment - might consider Review by Course Participant/Trainee
-
We spent alot of time troubleshooting other participant's raspberry. It would be good if the class have few sd card or standby pi4 for this course.. morning we have spent more that one 1hr to teoubleshoot 2 other praticipant's raspberry pi.1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment
Advanced raspberry pi requires more days to learn. Advance course for 2 days might be enough. Each module maybe give 2 scenario as the advance requires alot of understanding on how it actually works.
Compile programs and the functions for it. Ex
Vnc - remote desktop
I belief that each lecturer have their preference software to use..
Better to have 1 lecturer to teach as for me ill be taking 5 different course. Worried that i will have 5 different lecturer and if i have a wuestion its hard for me to point out who to send the question to. (Posted on 1/8/2020) - Will Recommend Review by Course Participant/Trainee
-
provide solutions to challenging quizzes1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment
start at 8.30 or 9 am instead of 10 am & end at 5pm sharp. thank you (Posted on 11/6/2019) - Overall, trainer is well versed. Review by Course Participant/Trainee
-
The course to start at 8am instead as the practice seesions is not enough as the ortion on Motors and ThingSpeak were not covered in details and has no practice. The SD card were not setup properly and we spent quite a bit of time setting them up and hence intrerrupted the learning. Overall, still a good course to attend.1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment
Could have spent more time on the explanantion of the wrapper program. Overall, trainer is well versed. (Posted on 11/6/2019) - overall the training was good Review by Course Participant/Trainee
-
Although this is an advance course, the course are simple, easy to follow and practical tools for me to use in my work. The instructor was very knowledgeable in what he was training. He always ensured that I knew and understood all elements of the training. I would recommend it to everyone. (Posted on 5/31/2019)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment - Might Recommend Review by Course Participant/Trainee
-
Classroom teaching environment and learning tools/resources.1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment
Course participants had earlier informed course administrator of their requirements for course-related tools such as the Raspberry Pi starter kit and laptops for in-class hands-on tasks. However, despite the requests being made via email, the tools were not prepared in advance and thus time was spent on such administrative matters during the actual training. (Posted on 9/6/2018) - Will Recommend Review by Course Participant/Trainee
-
. (Posted on 8/21/2018)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment - Will Recommend Review by Course Participant/Trainee
-
. (Posted on 8/21/2018)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment - Will Recommend Review by Course Participant/Trainee
-
Nil (Posted on 6/16/2018)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment - Will Recommend Review by Course Participant/Trainee
-
Check the Raspberry Pi project kit before issuing to the participants. See Further comments for more detail.1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment
Could you please check the wiring of the motor driver and the DC motor, they were of the wrong wire type, It should be a male to male wire instead of a male to female wire for the DC motor. Also, the soldering of the wires to the DC motor driver were poorly done. I had to borrow the trainer's motor driver and motor to follow the course lessons. Also, the connector for the Raspberry Pi Sense Hat is quite loose, the moment i have to disconnect it with the GPIO pins from the Raspberry Pi, The Sense Hat board came off, leaving the connector on the Raspberry Pi GPIO pins itself. I had to redo the soldering for the motor driver and the Dc motor again just to get it connected easily. One comment on the leads of the resistors, they are too thin for them to be placed into the breadboard which required a bit of force from me to get the resistors to have a good connection on the breadboard. (Posted on 5/27/2018) - Will Recommend Review by Course Participant/Trainee
-
Have lesser people per course (Posted on 5/20/2018)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment - Will Recommend Review by Course Participant/Trainee
-
Nil (Posted on 3/12/2017)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment - Will Recommend Review by Course Participant/Trainee
-
Will Recommend (Posted on 5/30/2016)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment - NA Review by Course Participant/Trainee
-
NA (Posted on 5/29/2016)1. Do you find the course meet your expectation? 2. Do you find the trainer knowledgeable in this subject? 3. How do you find the training environment
Write Your Own Review
You May Be Interested In These Courses
Raspberry Pi Robotics Workshop for Kids Level 1 (4 Sessions)
$600.00 (GST-exclusive)
$654.00
(GST-inclusive)
WSQ - Internet of Things (IoT) Fundamental for Beginners
$750.00 (GST-exclusive)
$817.50
(GST-inclusive)
WSQ - Mastering Raspberry Pi: Hands-On Practical Applications for Beginners
$900.00 (GST-exclusive)
$981.00
(GST-inclusive)
WSQ - Practical Electronics Design with Arduino Microcontroller
$400.00 (GST-exclusive)
$436.00
(GST-inclusive)
